Metal roofing prices in Stamford typically range from $5.50 to $20 per square foot for materials and installation, with repair services starting at $450. The final cost depends on factors like roof size, material choice, pitch, and complexity, but we are committed to transparent pricing and helping you understand your investment.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Stamford and lower Fairfield County: panel systems engineered for nor'easters, heavy wet snow, coastal humidity and summer thunderstorms, installed over ice-and-water protection at the eaves with proper ventilation and detailed flashing for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Stamford homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen under freeze-thaw cycles and tall seams that stand above meltwater. Excellent wind resistance for shoreline gusts and a durable finish against salt air. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of worn asphalt, cedar shake or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired where moisture or ice-dam damage shows, then a complete new metal system installed. Some insurers offer discounts for impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles, with no tear-off, less waste and lower cost. Popular on Stamford Capes and ranches with a single shingle layer. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing panels bent by fallen limbs or ice, resealing seams and penetrations, and fixing failed flashing before winter thaw or nor'easter rain becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs, with leaks traced to their true source (failed fasteners, seam separation, ice-dam backup, flashing gaps, pipe boots and dormer transitions) and fixed right, not just caulked over. Emergency tarping available after storms. |
| Screw Replacement & Re-Fastening | From $750 | Stamford's freeze-thaw swings and sun-to-shade temperature changes expand and contract metal roofs all year, so screws back out and rubber washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for garages, sheds, barns, workshops and carports across Fairfield County. Quality panels in durable colors, installed with proper screw patterns and closures that keep out wind-driven rain and snow. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of slate, shake or architectural shingles with the lifespan of steel, a favorite for Stamford homeowners who want metal performance on Colonials and Tudors without the standing seam look. Lightweight, walkable and wind-rated for shoreline gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish, with excellent hail and wind performance and profiles that mimic the cedar shake and slate looks common on Stamford homes. Quiet in heavy rain and resistant to salt-air corrosion. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows, dormers and full architectural roofs: premium metals that develop a living patina and last a century in coastal air. Custom fabrication for the fine details older Stamford homes call for. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance coating systems that extend roof life 10-15 years, restore color and protect against salt air without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and stone or brick transitions, the number one leak point on Stamford roofs. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Snow guards and rail systems for metal roofs, important in Stamford where heavy wet snow and ice-dam slides can drop onto entries, walkways, decks and shrubs. Layouts sized to your roof pitch and panel profile, with honest guidance on whether yours needs them. |
| Storm & Wind Damage Repair | Free inspection | Repair of wind, fallen-limb, ice and storm damage to metal roofing: thorough documentation with photos, an honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating wear, ice-dam damage and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles, snow retention coordinated with the gutter line, and downspouts that carry spring melt and nor'easter downpours away from foundations and stone walls. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, garages, carports and light commercial buildings across Stamford and Fairfield County, from North Stamford horse barns to Springdale and Glenbrook shops, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs require more materials and labor, while complex designs with multiple valleys, hips, and penetrations increase installation time and cost.
- Material type and gauge : Standing seam, copper, and stone-coated steel have different price points. Thicker gauge metal and specialty finishes also affect the overall cost.
- Accessibility and roof pitch : Steep roofs or those with limited access may require additional safety measures and equipment, increasing labor costs.
- Additional services : Services like gutter installation, snow guards, or flashing repair add to the project cost. These are often necessary for a complete roofing system.
What's included
- Travel included across the Stamford area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof dimensions and any known issues ready before calling. Our team at Stamford Metal Roofing will schedule a free inspection and provide a detailed written estimate that outlines materials, labor, and timeline. Call us at (475) 275-9394 to discuss your project and receive a no-obligation quote.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type, roof complexity, labor, and additional services. For example, copper roofing costs more than corrugated panels, and steep roofs require more labor. We provide a detailed estimate to explain all costs.
Do you offer free estimates?
Yes, we offer free inspections and estimates for all metal roofing projects. Call (475) 275-9394 to schedule an appointment at your convenience.
What payment methods do you accept?
We accept cash, checks, and major credit cards. We also offer financing options for larger projects. Contact us at (475) 275-9394 for more details on payment and financing.