Serving the Stamford area  ·  (475) 275-9394  ·  Open Mon-Sun 7am-7pm
📞 (475) 275-9394 Free Quote

Metal Roofing in Greenwich, CT (06830) · Local Professionals

Stamford Metal Roofing · Fast response in Greenwich and the Stamford area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+178Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Greenwich homeowners know that a roof here has to handle more than just rain. From the salt air rolling off Long Island Sound to the heavy wet snow that piles up on steep Colonial gables in the backcountry, your roof takes a beating year after year.

That's why property owners in Greenwich (06830) call Stamford Metal Roofing. We understand the unique demands of homes near Greenwich Point Park and the historic districts, and we install roofing systems that stand up to coastal humidity and nor'easters alike.

Metal Roofing in Greenwich (06830)

Greenwich is a town of contrasts. Along the shore, you have shingle-style and stone Colonials with deep porches and cedar siding, where salt air corrodes fasteners and flashing. Inland, the rolling acreage of North Greenwich and the wooded lots near the Mianus River put roofs under constant shade and debris, leading to moss and ice dams. The steep pitches and dormers common in older homes require careful detailing, especially around chimneys and skylights. Our team is experienced with copper and specialty metals that suit historic homes, as well as standing seam and metal shingle systems that mimic traditional materials while offering superior durability.

We've worked on everything from mid-century ranches in Glenville to large estates off Round Hill Road. Whether your property sits on a tight lot in downtown Greenwich or a sprawling backcountry parcel, we know how to navigate access and staging without disrupting your landscaping.

Our services in Greenwich

How a Job Works in Greenwich

Step 1: It starts with a phone call to (475) 275-9394 or a request through our website. We schedule a free on-site assessment at your convenience. Our estimator will inspect your existing roof, discuss your goals, and take detailed measurements. We'll also check for any signs of damage that might affect the installation, like soft decking or failed flashing.

Step 2: Once you approve the proposal, we handle the permitting process with the town. For homes in historic districts or with HOA requirements, we'll coordinate design review and provide the necessary documentation. Our crew arrives on time, protects your property with tarps and plywood as needed, and works efficiently to minimize disruption. We use only high-quality materials and follow manufacturer specifications to ensure your warranty remains valid.

Step 3: After installation, we conduct a thorough cleanup, including magnet sweeps for nails and a final walkthrough with you. We don't consider the job done until you're satisfied. We'll also provide you with maintenance tips to keep your metal roof performing at its best for decades.

Pricing for metal roofing in Greenwich depends on several factors: the size and complexity of your roof, the material you choose, and any necessary repairs to the underlying structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and copper or specialty metals at $20. For repairs, leak fixes start at $450, and screw replacement at $750. We always provide a detailed, written estimate before any work begins, so you know exactly what to expect. Call us at (475) 275-9394 for a free estimate tailored to your Greenwich home.

My home near Greenwich Point has cedar shingles and salt air damage. Can a metal roof handle the coastal conditions?
Absolutely. For coastal Greenwich homes, we often recommend copper or aluminum roofing, which resist corrosion from salt air. We also use stainless steel fasteners and ensure proper ventilation to prevent moisture buildup. Our team has extensive experience with shoreline properties and can recommend the best system for your exposure.
A nor'easter just ripped off some panels. How quickly can you respond for emergency repairs in Greenwich?
We prioritize storm damage calls and aim to be on-site within 24 to 48 hours, depending on demand. For active leaks, we can often provide temporary mitigation the same day. Call us at (475) 275-9394 to schedule an inspection and get your roof secured.
What does a typical metal roof replacement cost for a 2,500 square foot Colonial in Greenwich?
For a home that size, most replacements fall between $18,000 and $35,000, depending on material, roof pitch, and whether we need to remove existing layers. Standing seam and copper are at the higher end. We provide free estimates with line-item pricing so you can see the breakdown.
Do I need a permit to replace my roof in Greenwich, and are there historic district rules?
Yes, roofing permits are required for most replacements. If your home is in a historic district, you may also need design review approval. We recommend checking with the City of Greenwich website for initial guidance, and we can handle the paperwork and coordination on your behalf.
My neighbor's tree branches hang over my roof. What are my rights if I want to trim them?
In Connecticut, you generally have the right to trim branches that overhang your property line, but you should check local ordinances and consult with your neighbor first. If the tree is on their property, you may need their permission. We can provide a roof inspection report to document any damage and help you communicate with your neighbor or HOA.
Does your company carry insurance coverage for workers and property damage?
Yes, we are fully insured with general liability and workers' compensation coverage. Your property is protected from the moment we start work.
What maintenance should I do each season to prevent ice dams on my metal roof in Greenwich?
Keep gutters and downspouts clear of leaves and debris, especially before winter. After heavy snow, use a roof rake to remove accumulation from the eaves. We also recommend annual inspections to check fasteners and flashing. For added protection, consider installing snow guards and ice shields, which we specialize in.
Why choose us?

Trusted professionals in Stamford

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Stamford

All your work handled by qualified professionals in Stamford

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

178+ Verified Client Reviews in Stamford

⭐⭐⭐⭐⭐ 4.9/5 · 178 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Stamford · Response within 24h · No commitment · ☎ (475) 275-9394

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Stamford ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm